Re-Connecting Solax SKTL / SKSU / SKTL5000E / SKSU5000E Inverter WIFI

How to Reconnect Your SolaX Inverter to Wi-Fi (SKTL / SKSU Series)

If your Wi-Fi router was recently changed, or if your inverter has disconnected from the local network, follow these steps using a laptop, tablet, or smartphone to reconnect it.

Step 1: Connect to the Inverter’s Local Wi-Fi Signal

1. Open the Wi-Fi settings on your device (laptop, iPad, or smartphone).
2. Look for a network name starting with ⁠Solax_⁠ followed by numbers or letters (e.g., ⁠Solax_A1B2C3⁠).
3. Connect to this ⁠Solax_xxxx⁠ network.

(Note: Your device may say "No Internet Connection" once connected — this is normal).

Step 2: Access the Inverter Settings Page

1. Open a web browser (such as Google Chrome or Safari).
2. In the address bar at the top, type ⁠11.11.11.1⁠ and press Enter.
3. When the login window appears, enter:
Username: ⁠admin⁠
Password: ⁠admin⁠
4. Click Login.

Step 3: Connect to Your Home Wi-Fi

1. Once logged in, click the Find AP button to scan for nearby Wi-Fi networks.
2. Select your home Wi-Fi network name from the list.
3. In the Wi-Fi Key (Password) field below, carefully type your home Wi-Fi password.
4. Click Save & Reboot.

Step 4: Verify the Connection

1. Wait about 60 seconds for the inverter module to restart.
2. Reconnect your device to the ⁠Solax_xxxx⁠ network if it disconnected.
3. Refresh or go back to ⁠11.11.11.1⁠ in your browser and log in again using ⁠admin⁠ / ⁠admin⁠.
4. Check the status page for an IP Address:

If you see an address (e.g., ⁠192.168.1.X⁠ or ⁠192.168.0.X⁠), the inverter is successfully connected to your home network! If the IP address is blank or shows zeros, the Wi-Fi password may have been entered incorrectly. Repeat Step 3 to re-enter it.

Once your Inverter is sending data to the portal again then please login to the Solax Portal on address https://www.solax-portal.com/home/login?rurl= SolaX X-Monitoring System

If you still have issues after this please give Steve a call on 0274-711-771 or click on the ONLINE CHAT option here on this website.
Our Technical Support time is BILLABLE and you will be charged, please be aware of this.

Note: Information on this page is Copyright Hitek Solar NZ and cannot be replicated or re-posted or copied without written permission.

Re-Connecting Solax SKTL / SKSU / SKTL5000E / SKSU5000E Inverter WIFI

How to Reconnect Your SolaX Inverter to Wi-Fi (SKTL / SKSU Series)If your Wi-Fi router was recently changed, or if your inverter has disconnected from the local network, follow these steps using a laptop, tablet, or smartphone to reconnect it.

How to Reconnect Your SolaX Inverter to Wi-Fi (SKTL / SKSU Series)

If your Wi-Fi router was recently changed, or if your inverter has disconnected from the local network, follow these steps using a laptop, tablet, or smartphone to reconnect it.